Point-contact transistor (nonfiction): Difference between revisions
(Created page with "A '''point-contact transistor''' was the first type of solid-state electronic transistor ever constructed. It was developed by research scientists John Bardeen and Walter Bra...") |
No edit summary |
||
| Line 1: | Line 1: | ||
A '''point-contact transistor''' was the first type of solid-state electronic transistor ever constructed. | [[File:Point-contact_transistor.png|thumb|Diagram of an early point-contact transistor.]]A '''point-contact transistor''' was the first type of solid-state electronic transistor ever constructed. | ||
It was developed by research scientists John Bardeen and Walter Brattain at Bell Laboratories in December, 1947. They worked in a group led by physicist William Shockley. The group had been working together on experiments and theories of electric field effects in solid state materials, with the aim of replacing vacuum tubes with a smaller, less power-consuming device. | It was developed by research scientists John Bardeen and Walter Brattain at Bell Laboratories in December, 1947. They worked in a group led by physicist William Shockley. The group had been working together on experiments and theories of electric field effects in solid state materials, with the aim of replacing vacuum tubes with a smaller, less power-consuming device. | ||
Revision as of 10:16, 15 December 2016
A point-contact transistor was the first type of solid-state electronic transistor ever constructed.
It was developed by research scientists John Bardeen and Walter Brattain at Bell Laboratories in December, 1947. They worked in a group led by physicist William Shockley. The group had been working together on experiments and theories of electric field effects in solid state materials, with the aim of replacing vacuum tubes with a smaller, less power-consuming device.
The critical experiment, carried out on December 16, 1947, consisted of a block of germanium, a semiconductor, with two very closely spaced gold contacts held against it by a spring. Brattain attached a small strip of gold foil over the point of a plastic triangle — a configuration which is essentially a point-contact diode. He then carefully sliced through the gold at the tip of the triangle. This produced two electrically isolated gold contacts very close to each other.
The piece of germanium used had a surface layer with an excess of electrons. When an electric signal traveled in through the gold foil, it injected holes (points which lack electrons). This created a thin layer which had a scarcity of electrons.
A small positive current applied to one of the two contacts had an influence on the current which flowed between the other contact and the base upon which the block of germanium was mounted. In fact, a small change in the first contact current caused a greater change in the second contact current, thus it was an amplifier. The first contact is the "emitter" and the second contact is the "collector". The low-current input terminal into the point-contact transistor is the emitter, while the output high current terminals are the base and collector.
In the News
Fiction cross-reference
Nonfiction cross-reference
External links:
- Point-contact transistor @ Wikipedia