Tap and die (nonfiction): Difference between revisions
(Created page with "'''Taps and dies''' are tools used to create screw threads, which is called threading. Many are cutting tools; others are forming tools. A tap is used to cut or form the femal...") |
No edit summary |
||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
'''Taps and dies''' are tools used to create screw threads, which is called threading. Many are cutting tools; others are forming tools. A tap is used to cut or form the female portion of the mating pair (e.g. a nut). A die is used to cut or form the male portion of the mating pair (e.g. a bolt). The process of cutting or forming threads using a tap is called tapping, whereas the process using a die is called threading. | '''Taps and dies''' are tools used to create screw threads, which is called threading. | ||
== Description == | |||
Many are cutting tools; others are forming tools. A tap is used to cut or form the female portion of the mating pair (e.g. a nut). A die is used to cut or form the male portion of the mating pair (e.g. a bolt). The process of cutting or forming threads using a tap is called tapping, whereas the process using a die is called threading. | |||
Both tools can be used to clean up a thread, which is called chasing. However, using an ordinary tap or die to clean threads generally removes some material, which results in looser, weaker threads. Because of this, machinists generally clean threads with special taps and dies—called chasers—made for that purpose. Chasers are made of softer materials and don't cut new threads. However they still fit tighter than actual fasteners, and are fluted like regular taps and dies so debris can escape. Car mechanics, for example, use chasers on spark plug threads, to remove corrosion and carbon build-up. | Both tools can be used to clean up a thread, which is called chasing. However, using an ordinary tap or die to clean threads generally removes some material, which results in looser, weaker threads. Because of this, machinists generally clean threads with special taps and dies—called chasers—made for that purpose. Chasers are made of softer materials and don't cut new threads. However they still fit tighter than actual fasteners, and are fluted like regular taps and dies so debris can escape. Car mechanics, for example, use chasers on spark plug threads, to remove corrosion and carbon build-up. | ||
== In the News == | |||
<gallery> | |||
File:A Rivet Runs Through It.jpg|link=A Rivet Runs Through It|'''''[[A Rivet Runs Through It]]''''' is a semi-autobiographical collection of three stories by American author Norman Maclean (1902–1990) about construction and home repair. | |||
</gallery> | |||
== Fiction cross-reference == | |||
* ''[[A Rivet Runs Through It]]'' | |||
* [[Gnomon algorithm]] | |||
* [[Gnomon Chronicles]] | |||
== Nonfiction cross-reference == | |||
== External links == | |||
* [https://en.wikipedia.org/wiki/Tap_and_die Tap and die] @ Wikipedia | |||
[[Category:Nonfiction (nonfiction)]] | |||
[[Category:Tools (nonfiction)]] | |||
Latest revision as of 08:10, 29 October 2022
Taps and dies are tools used to create screw threads, which is called threading.
Description
Many are cutting tools; others are forming tools. A tap is used to cut or form the female portion of the mating pair (e.g. a nut). A die is used to cut or form the male portion of the mating pair (e.g. a bolt). The process of cutting or forming threads using a tap is called tapping, whereas the process using a die is called threading.
Both tools can be used to clean up a thread, which is called chasing. However, using an ordinary tap or die to clean threads generally removes some material, which results in looser, weaker threads. Because of this, machinists generally clean threads with special taps and dies—called chasers—made for that purpose. Chasers are made of softer materials and don't cut new threads. However they still fit tighter than actual fasteners, and are fluted like regular taps and dies so debris can escape. Car mechanics, for example, use chasers on spark plug threads, to remove corrosion and carbon build-up.
In the News
A Rivet Runs Through It is a semi-autobiographical collection of three stories by American author Norman Maclean (1902–1990) about construction and home repair.
Fiction cross-reference
Nonfiction cross-reference
External links
- Tap and die @ Wikipedia